Ge Universal Remote Rc94948 H Manual

1. Ge Universal Remote Rc94948 H Manuals
2. Ge Universal Remote Rc94948-h Manual
3. Ge Universal Remote Rc94948 H Manual Pdf
4. Ge Universal Remote Rc94948 H Manual Transmission

There are many sources suggesting that you cannot use a universal remote with Amazon Fire TV line of streamers. This is because none of the Fire TV products including the original Fire TV Box, Stick, Pendant, and Cube do not have a built-in infra red (IR) receiver like most consumer electronic A/V devices. Thus, universal remotes which use IR won't work with the Fire TV. Instead, you must control the Fire TV with Amazon's proprietary remote.
Until now, there were no complete options available for single remote control of all devices when using the Fire TV. To address this issue, Inteset Technologies provides a simple, USB-based, plug-and-play IR receiver that is compatible with the Amazon Fire TV product line called the IReTV. Now you can control all of your equipment with one universal remote. The IReTV works directly with with both the Inteset Int-422 and Logitech Harmony line of universal remotes.

If you have the Amazon Fire TV Cube, Stick, or Pendent device, you'll need the Inteset USB Y cable that facilitates a USB data and power connection from the single micro USB port available on the Cube, Stick and Pendant. Setup is as shown in the diagrams below.

Find the device from the category GE Universal Remote, look through and download the manual. GE Universal Remote. First of all, you need to pick you GE universal remote and you have to remove the battery cover of your GE universal remote. Now, you just have to identify the version of your GE Universal Remote, here are some tips to locate it, if there is any confusion, V1-V5, none = V1 (older), newest = CL3 or CL4.

Video Tutorial on how to program your GE remote to any device. In this example I am using a GE 33709 4 Device Remote.If You don't have Codes for this remote.

If you have the original Fire TV box, simply plug the IReTV into the USB port of the Fire TV as shown in the diagram below. Position the IR receiver end of the IReTV in a location that is line-of-site from where you'll be using the remote. Note that the Fire TV may be positioned behind closed doors, or behind the TV.

Programming the Inteset Int-422 for use with the IReTV and Fire TV is no different than the setup for use with any other device:

1. Press the Device key on the remote you wish to program the Fire TV (ie: A, B, C, or D).
2. Press and hold the SET button on the remote until the signal LED (red light) blinks twice, then release the button.
3. Enter the five-digit setup code for the Fire TV which is: 02049
4. The LED blinks once as each digit is entered. If the code is valid, the LED will blink twice quickly.

What two metals are scuba tanks made from. You can view the button mappings of the Inteset Int-422 remote for the Fire TV here.

Programming the Logitech Harmony for use with the IReTV and Fire TV is no different than the setup for use with any other device. Follow the remote's instructions for Device Setup included with the Harmony. Note that Inteset is currently working with Logitech to add the IReTV/Fire TV to the Harmony device database. In the meantime, when prompted to enter the manufacture and device to set up, enter Microsoft and Xbox 360 (the IR codes sent from the remote to control the Fire TV use the same IR codes as for the Xbox 360).
You can view the button mappings of the Harmony remote for the IReTV and Fire TV here.

With the Universal remote we can operate our devices and components and these remote controls able to manage the audio and also the video deices which are related to any brand or any model number. To operate any of your device you need to enter some specific digit numbers such as 2, 3, 4 or 5 digit device code into your universal tv remote those codes you can find by Brand, Cable Box & DVR, Satellite Box & DVR, Dvd & Blu-ray Player, CD Player, VCR or Misc Audio Aux and you can find all universal remote codes in single table. If you can't able to find your remote control model number you have to check inside the battery comportment or it might be back of the remote.

Contents

• 1 All Universal Remote Codes List

We provided instructions to operate the remote, there are methods to program a universal remote control with your devices by using the specific tv codes for universal remote. So follow the below steps if you already have the three digit or four digit or the five digit universal remote control codes with you then you can follow the below procedure. If do not check the below table.

All Universal Remote Codes List

If you have plenty of remotes then it's time to take the Universal remote. In recent technological days we have various types of remotes for each and everything like for the TV, DVD Player, Cable Box, music players and the DVR…etc. Of course each of those devices can manufactured their own remotes and also it might be confused about what is for what device. At that time we have Universal remote controls for every device and you can get them from the below best universal remote list including their codes.

Brand Wise Universal Remote Codes List

Blu-Ray Universal Remote Codes List

Ge Universal Remote Rc94948 H Manuals

Soundbar Universal Remote Codes List

Ge Universal Remote Rc94948-h Manual

DVD Universal Remote Codes List

All Universal Remote Codes Working List

Universal Remote Codes For Cable Box & Dvr

Universal Remote Codes For Satellite Box & Dvr

Universal Remote Codes For Dvd & Blu-ray Player

Universal Remote Codes For CD Player

Universal Remote Codes For Vcr

Universal Remote Codes For Misc Audio Aux

Ge Universal Remote Rc94948 H Manual Pdf

With the Universal Remote Codes we can operate any device like DVD, various types of Televisions and also all other components. But the ability of universal remote may vary depending upon customer's equipment operate any other component, so why late get the tv remote codes list from the above table.

How To Program A Universal Remote?

There are three simple ways to setup or to configure a universal remote and the first one is Using a Keycode, Programming Via Universal Remote Code Search and Manual Setup.

1) Keycode

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

Ge Universal Remote Rc94948 H Manual Transmission

• First you need to 'Turn The Device On'
• Press the 'TV' on your 'Universal Remote'
• Now press and hold the 'Setup button' of the Universal Remote until it shows the 'Light Flash' (It means it is in 'Learning mode')
• Finally enter the 'Keycode' which you collected from the programing guide (Instructions Booklet)
• Once you've done this procedure, just 'point your remote at the TV' and then 'Press And Hold The Power' button
• You can release the 'Power Button' whenever the screen switches off

That's all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

2) Programming Via Universal Remote Code Search

If you couldn't find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

• First of all 'Turn The Device On'
• Now press and hold the 'Setup' button
• Enter the '9-9-1' (three digit) code
• Now hold down the 'Power Button' on the remote and then press the Channel up them until the device in this case your tv 'Turns Off'

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

3) Manual Setup

If the above two methods can't be helped to you then the final method is 'Manual Setup', if you configure the universal remote control manually your device can work perfectly.

• Place the 'Remote Control facing To The Universal remote control you want to replace'
• Now press the 'Setup Button' or 'Magic'
• Then enter the 'Code' (You can find this in Instruction Booklet) for manual Programming
• Now press any of the function which you want to 'program' for instance 'TV Volume Up'
• Then press And hold the corresponding key on the 'Original Remote Controller'
• Finally, one of the lights will 'blink' that means it has been saved correctly
• Now your 'TV Volume Up' button has been saved to the Universal remote and you can use the volume button.

You have to repeat for all the buttons to program, once you have done to all the functions which you want and finally press the 'Setup Button' Again to finish the session.

How Can we find the code for my Universal Remote?

With the below steps you can program your remote control by using automatic code search, so follow the steps below.

1. Click on TV or Any Of the Desired Device
2. Until the TV Key Blinks Twice you need to keep on press and hold 'Setup'
3. The TV Key Will Blink Twice when you enter the '9-9-1'
4. Once click on 'Power' and release
5. We need to 'Turn Off' our device for that hold the 'CH+' continuously
6. Finally, the TV Key should blink twice, so once press on 'Setup' and release